AR106033 2018 1/8 Outcast Truck 6S BLX Orange

659.99$

AR106033 2018 1/8 Outcast Truck 6S BLX Orange

Rupture de stock

UGS : ARAD84NW Catégorie :

Description

 

AR106033 2018 1/8 Outcast Truck 6S BLX Orange

 

ARRMA 2018 1/8 OUTCAST 6S Stunt Truck 4WD RTR Orange (see fullscreen)
ARRMA PART NUMBER
AR106032
AR106033
VEHICLE NAME
OUTCAST 6S BLX (GREY)
OUTCAST 6S BLX (ORANGE)
SCALE
1/8
1/8
MAX SPEED POSSIBLE
60+mph / 96+km/h
60+mph / 96+km/h
POWER TYPE
Brushless
Brushless
BUILD STATUS
RTR
RTR
SALEABLE PART #
AR106032
AR106033
HOBBICO SALEABLE PART #
ARAD84SW
ARAD84NW
BUILD CONFIGURATION OPTIONS
Mid Motor
Mid Motor
DRIVE TYPE
4WD
4WD
VEHICLE TYPE
Stunt Truck
Stunt Truck
SURFACE
Off-road
Off-road
LENGTH
540mm / 21.26«
540mm / 21.26«
WHEELBASE
328mm / 12.91«
328mm / 12.91«
RIDE HEIGHT
47mm / 1.85«
47mm / 1.85«
FRONT WIDTH
461mm / 18.15«
461mm / 18.15«
REAR WIDTH
461mm / 18.15«
461mm / 18.15«
HEIGHT
230mm / 9.06«
230mm / 9.06«
LOCKING DIFFS
No
No
NUMBER OF DIFFERENTIALS
3
3
WEIGHT (NO BATTERY)
4.86kg / 10lbs 11oz
4.86kg / 10lbs 11oz
BATTERY MAX DIMENSIONS
158x48x70mm / 6.22×1.89×2.76«
158x48x70mm / 6.22×1.89×2.76«
WARRANTY LEVEL
2 Year Limited
2 Year Limited
       This is the Brushless Electric Powered, 2.4GHz Radio Controlled         
         Ready to Run 1/8 scale Outcast 6S BLX Off-Road Stunt Truck.           
                                                                               
FEATURES: Chassis: Aluminum construction, black in color, 0.12" (3mm) thick    
            plastic side guards, front and rear braces                         
          Brushless Motor: Arrma BLX 2050Kv, four pole equipped for smooth and 
            consistent power delivery, gold bullet connectors                  
          Electronic Speed Control: Arrma BLX185 150A waterproof, 6S LiPo ready
            two stage LiPo cutoff, cooling fan, two XT-90 connectors, 6V BEC   
          Radio: Tactic TTX300 2.4GHz 3-channel and TR326 3-Channel SLT HV     
            receiver                                                           
          Steering Servo: ADS-15M waterproof, metal gears and 208 oz-in        
            (15kg-cm) of torque at 7.2V                                        
          Shocks: Oil-filled red anodized aluminum bodies, factory set, 0.16"  
            (4mm) diameter shafts, shock cap protectors                        
          Shock Towers: Aluminum, black in color, 0.196" (5mm) thick           
          Differentials: Three, non-locking, metal gear                        
          Pinion Gear: Steel 12 tooth Mod1, optional 16T pinion gear included  
          Battery Tray: Molded plastic, balance plug stowage area keeps        
            balance plugs away from rotating parts                             
          Body: Trimmed and painted silver, roll cage for added safety         
          Rear Wing: Scale molded plastic for stability at high speeds,        
            wheelie bar integrated into wing mount for long high angled        
            wheelies                                                           
          Steering Assembly: Bushing equipped                                  
          Tires: dBoots Back-Flip multi-surface, wheel bead diameter 3.8"      
            (97mm), overall diameter 6.8" (172mm), width 3.0" (77mm)           
          Wheels: Five spoke black plastic, 17mm hex                           
          Warranty: Two year limited warranty beginning at date of purchase    
                                                                               
INCLUDES: RTR Outcast 6S BLX Off-Road Stunt Truck with Motor, ESC, Radio       
            System, painted Body, Rear Wing, Instruction Manual, Cross Wrench  
            and 1.5, 2.0, 2.5 and 5.0mm Hex Wrenches                           
                                                                               
REQUIRES: Battery: Two 2-3S LiPo with max dimensions of 6.22 x 1.89 x 2.76"    
           (158 x 48 x 70mm) with XT90 connectors, a single 4S or 6S LiPo      
           can be used with a "Jumper" that must be attached to the unused     
           battery connector on the ESC                                        
          LiPo compatible charger with XT90 connector                          
          LiPo charging bag                                                    
          AA Cells: Four for transmitter                                       
          Track and maintenance equipment                                      
                                                                               
SPECS:      Vehicle;                                                           
          Length: 21.26" (540mm)                                               
          Wheelbase: 12.91" (328mm)                                            
          Ride Height: 1.85" (47mm)                                            
          Front and Rear Width: 18.15" (461mm)                                 
          Height: 9.06" (230mm)                                                
          Weight: 10lbs, 11oz (4.86kg) without battery                         
          Maximum Battery Dimensions: 6.22 x 1.89 x 2.76" (158 x 48 x 70mm)    
            Body;                                                              
          Length: 18.5" (470mm)                                                
          Width: 8.4" (214mm) measured at wheel flares, widest point           
          Height: 4.6" (118mm) measured at roll bar                            
                                                                               
COMMENTS: For replacement ball bearings use:                                   
          Qty.  Size      Location           Qty.      Bearing Set             
           2   8x16mm     Fr Diff             1         ARAC3156               
           2   8x16mm     Center Diff         1         ARAC3156               
           2   8x16mm     Rear Diff           1         ARAC3156               
           2   8x16mm     Steering Blocks     1         ARAC3156               
           2  15x21mm     Streering Blocks    1         ARAC3162               
           1  8x19mm      Front Input Gear    1         ARAC3159               
           1  5x11mm      Front Input Shaft   1         ARAC3150               
           2  8x16mm      Rear Hubs           1         ARAC3156               
           2  15x21mm     Rear Hubs           1         ARAC3162               
           1  8x19mm      Rear Input Gear     1         ARAC3159               
           1  5x11mm      Rear Input Shaft    1         ARAC3150               
           4  6x10mm      Steering            2         ARAC3153               
                                                                               
          The BLX185 ESC was set from factory to default to a LiPo battery     
            mode.                                                              
          If any adjustments such as recalibration were made, check to see     
            that the battery mode has not been inadvertently set to NiMH mode. 
          Follow these steps to verify battery mode;                           
          1. Raise the vehicle chassis so that the wheels are not touching     
             anything.                                                         
          2. With the battery or batteries charged and connected to the        
             vehicle's ESC leads, switch on the transmitter and then switch    
             on the vehicle. If a green LED flashes once the ESC is in LiPo    
             mode. If there is no LED flash on the ESC, and a pulsing noise    
             is made by the motor, the ESC is in NiMH mode. If you intend to   
             use LiPo batteries DO NOT operate ESC in NiMH mode, the           
             batteries may be damaged.                                         
                                                                               
          To switch ESC from NiMH mode to LiPo mode perform the following      
             steps;                                                            
          1. Connect battery, switch on transmitter, press and hold set        
             button and turn on ESC. The red LED will flash.                   
          2. Keep holding set button until green LED flashes. The number of    
             flashes represents the variable number of attributes being        
             programmed.                                                       
          3. To enter the battery mode programming function, release the set   
             button when one green LED flashes.                                
          4. Press the set button to change battery mode between LiPo and      
             NiMH. One RED LED flash indicates ESC is set to LiPo mode.        
          5. To save setting, switch ESC off.                                  
                                                                               
          Some manuals list the wrong shock differential fluild and shock oil. 
          ARRMA recommends the fluids and oils listed below for the truck.     
                                                                               
          Front and Rear Diffs - 10k Oil                                       
          Center Diff - 100k Oil                                               
          Front Shocks - 800cSt Oil                                            
          Rear Shocks - 550cSt Oil