DLE-222cc 4-Cyl Gas Engine w/EI & Muffs

2,293.49$

DLE-222cc 4-Cyl Gas Engine w/EI/Mufflers/Mount

UGS : DLEG0222 Catégorie:

Description

This is the DLE 222cc Gasoline Powered Engine with Electronic Ignition.

FEATURES: Dual carburetors for maximimum performance
Double V-type reed valve bottom induction
Six bolt prop hub
Fully automatic electronic ignition
Two year limited warranty through Hobby Services beginning at date
of purchase

INCLUDES: Engine, four spark plugs, standoffs, ignition, instruction manual
two mufflers, prop hub and throttle arm extension

REQUIRES: 87 octane gasoline
2-cycle oil, mix ratio for this engine is 30 parts gas to one part
oil and must be followed exactly for warranty consideration
and optimum performance
Ignition Battery: Two 4.8 – 6V NiCd or NiMH batteries OR 7.4V LiPo
Packs or 6.6V LiFe packs (LiPo & LiFe require voltage regulator)
(separate receiver style pack can be used)
Propeller: 32×10, 32×12, 34×10
Field Equipment

SPECS: Engine;
Output Power: 21.5 HP at 7,500 RPM
RPM Range: 1,000 – 7,500
Idle Speed: 1000 RPM
Displacement: 13.6 cu in (222.5cc)
Bore: 1.77″ (45mm)
Stroke: 1.38″ (35mm)
Compression Ratio: 7.6:1
Engine Weight: 10.9lbs (174.6oz) (4950g)
Total Width Including Both Cylinder Heads: 10.1″ (258mm) not
including spark plugs
Distance between Horizontal Mounting Hole Centers: 3.2″ (81mm)
Distance between Vertical Mounting Hole Centers: 3.6″ (91mm)
Height of Entire Mounting Plate: 4.2″ (107mm)
Widtht of Entire Mounting Plate: 3.8″ (96mm)
Length from Mounting Plate to Front Bearing: 8.97″ (228mm)
Length from Mounting Plate to Prop Hub: 10.1″ (258mm)
Height from Crankcase to top of Carburetors: 6.2″ (157mm)
Distance between Muffler Mounting Hole Centers: 1.6″ (40.5mm)
Height from Crankcase to end of Muffler Pipe Outlet: 11.2″ (286mm)
Muffler Outlet Diameter: 1.2″ (30mm)
Cylinder Head Exhaust Outlet Height: 0.51″ (13mm)
Cylinder Head Exhaust Outlet Width: 1.1″ (27mm)
Muffler Can Length: 8.4″ (214mm)
Muffler Can Diameter: 2″ (50mm)
Exhaust Pipe Diameter: 1.2″ (31mm)
Exhaust Pipe Length: 6″ (152mm)
Gasoline/Oil Mixture: 30:1
Gasoline Octane Rating: 87-93
Recommended Propellers: 26×12, 28×10
Spark Plugs: DLE 222-Q26 (DLEG2226) or equivalent
Carburetor;
Carburetor is preset from the factory but may require slight
needle adjustment depending on altitude
Low Speed Needle: 1.5 turns from closed
High Speed Needle: 1.5 turns from closed

COMMENTS: To avoid permanent damage to the electronic ignition system, NEVER
turn your DLE engine over with the system switched on and the plug
not installed.

jxs 05/06/10
ir/jxs
updt 10/07/10