Traxxas Stampede VXL 1/10 RTR 2WD Monster Truck – Red TRA36076-4RED

398.96$

UGS : TRA36076-4RED Catégories : ,

Description

Traxxas Stampede VXL 1/10 RTR 2WD Monster Truck – Red TRA36076-4RED

 

Stampede VXL (#36076-4) Side View (Green)

Le Stampede VXL définit les performances extrêmes des monster trucks. La puissance sans balai Extreme Velineon force le Stampede à atteindre une vitesse de 65 mi / h avec une gestion de stabilité innovante Traxxas (TSM) pour rendre la puissance plus accessible. Faites l’expérience de la vitesse et de la réaction à l’accélérateur comme vous ne les avez jamais vues auparavant dans un monster truck. Déclenchez un wheelie à 50 mph et vous apprécierez la barre de wheelie standard. Des composants électroniques entièrement étanches garantissent que Stampede VXL est prêt à être utilisé par tous les temps. Conçu pour la vitesse et construit Traxxas Tough, le Stampede VXL inaugure une nouvelle ère de monster trucks aux performances extrêmes.

Caractéristiques

Gestion de la stabilité Traxxas
Emetteur et récepteur TQi 2,4 GHz
Electronique étanche
Traxxas High-Current Connector
Câblage Maxx Cable 12 Gauge
Servo de direction numérique étanche à couple élevé
Transmission Magnum 272 avec engrenages en acier
Tendeurs en acier de précision avec embouts renforcés
Matériel métrique de sortilège
Batterie et chargeur vendus séparément
Gestion de la stabilité Traxxas

Traxxas Stability Management (TSM) vous permet de faire l’expérience de la puissance, de la vitesse et de l’accélération extrêmes du Stampede VXL en facilitant le contrôle sur les surfaces glissantes telles que la terre, le béton lisse, et même la glace et la neige. Allez-y, coupez le fil! TSM détecte la direction du véhicule et apporte des corrections de direction pour fournir une accélération à pleins gaz sans queue de poisson ni spin-out. En virage, TSM corrige intuitivement la ligne du véhicule pour accélérer les vitesses de sortie. TSM améliore même le freinage en gardant la flèche droite du camion jusqu’à l’arrêt complet. TSM fait tout cela sans s’immiscer dans le plaisir de conduire et sans produire d’effets secondaires inattendus. TSM peut être réglé (ou désactivé) pour différentes surfaces en ajustant simplement le bouton multifonction de l’émetteur TQi ou en ajustant le curseur de l’application Traxxas Link. Conduisez plus vite et amusez-vous davantage avec TSM. Vous ne pouvez même pas réaliser à quel point cela vous aide tant que vous n’essayez pas de conduire sans elle.

Puissance sans brosse Velineon éprouvée et à la pointe de la classe

Le moteur sans balai Velineon et le contrôle électronique de la vitesse (ESC) fonctionnent ensemble pour offrir le maximum d’efficacité, de rapidité et de temps d’exécution. Avec le Stampede VXL, le choix de votre batterie détermine votre vitesse et votre niveau de compétence. Velineon accepte la plus large gamme de types de batteries, y compris les packs Lithium Polymer à 3 cellules (LiPo). Ces packs pompent plus de 11 volts de puissance pour une vitesse intense de niveau 5 au-delà de 65 mph! Rien d’autre ne vient même près. La détection intégrée de basse tension dans le contrôleur VXL-3s vous aide à maintenir vos batteries LiPo en parfait état.

100% assemblé et prêt pour votre batterie et votre chargeur

La Stampede VXL est prête à faire la course avec le système de radio évolué TQi à 2 canaux 2,4 GHz et le puissant système d’alimentation Velineon Brushless. L’ingénierie de classe mondiale et l’attention portée par Traxxas aux détails sont quelques-unes des raisons pour lesquelles Stampede est un favori de longue date pour le plaisir des monstres lourds. Aucun autre camion n’offre le niveau de support du Traxxas Stampede VXL avec une disponibilité inégalée de ses pièces.

Traxxas Stability Management (TSM)

Traxxas Stability Management
Micro Receiver, TQi 2.4GHz with Traxxas Link and TSM (5-channel) (#6533) (three-quarter view)Traxxas Stability Management TSM® makes it possible to experience all the extreme power, speed, and acceleration that was engineered into Traxxas models by making it much easier to control the vehicle on common slippery surfaces such as loose dirt, smooth concrete, and even ice and snow. Punch it off the line and TSM goes to work sensing the vehicle’s direction and making steering corrections to provide straight-ahead fullthrottle acceleration without fishtailing, spinouts, and loss of control. TSM also works during cornering, first making intuitive corrections to maintain the vehicle’s line, then hammer the throttle earlier in the turn for much faster exit speeds. Braking is dramatically improved as TSM works to keep Traxxas trucks arrow straight until they come to a complete stop. Traxxas TSM gives all the benefits modern electronic stabilization has to offer without intruding on driving fun or introducing unexpected side effects that can be found on other systems such as drastically reduced turning radius, braking assistance that times out (quits), throttle restrictions, and an overall disconnected driving feel. Traxxas engineers developed superior tuning algorithms that run on high-speed, precision electronic components to create a system that works invisibly, in the background, without ever limiting throttle. TSM can be fine tuned (or turned off) for different surfaces by simply adjusting the multi-function knob on the TQi transmitter, or by adjusting the slider in the Traxxas Link app. The result is driving faster, with more ease, and having more fun. In fact, the driver may not even realize how much TSM is helping until it is turned off and their driving skills are tested without it! (click here for more details)

TSM BENEFITS
  • TSM makes Traxxas vehicles easier to drive, particularly on loose surfaces
  • TSM makes driving more fun by allowing the driver to accelerate harder and drive faster with much greater control
  • TSM works to stabilize vehicles over rough surfaces as the gyro effect of the spinning front tires continues to “steer” when the vehicle is in the air
  • TSM dramatically improves braking performance by preventing spinouts
  • TSM allows faster cornering speeds
  • TSM never restricts throttle (or fun!)
  • TSM allows the driver to accelerate harder when exiting a turn
  • TSM works invisibly in the background
  • The driver maintains their connected feel with the vehicle
  • The amount of TSM assistance is fully adjustable
  • TSM can be turned off or adjusted from the TQi Transmitter
  • TSM is fully compatible with Traxxas Link
  • TSM does not require any complicated set up or instructions.

Traxxas Stability Management (TSM) (#6533) (2-channel Transmitter)

 

The World’s Most Advanced Ready-To-Race® Radio System

TQi 2.4GHz (#6509X/#6528) Compatible with Traxxas Link Wireless Module (2-Ch)Total Control. Traxxas models deserve the world’s most advanced Ready-To-Race® radio system. The radio system is the sole connection between the driver and machine. It has to be precise, comfortable, powerful, and reliable. The all-new Traxxas® TQi™ radio system arrives with a full complement of tuning features; long-range, high-output, 2.4GHz signal, and proven Traxxas reliability for rock-solid performance. It’s so advanced; it doesn’t even need an external antenna.

 

TQi Traxxas Link Wireless Module (#6511) - (installed)Traxxas Link Wireless Module Compatible
The TQi’s most important feature may already be in your pocket. Equip the TQi with a Traxxas Link Wireless Module (#6511, sold separately) and turn your Android, iPad® iPhone® or iPod touch® (sold separately) into a powerful tuning tool for your Traxxas model. The full-color display combines with the free Traxxas Link™ App to deliver an intuitive, high-definition, full-color graphical user interface that optimizes your radio system for ultimate vehicle control. Traxxas Link also opens the door to telemetry capability when you add optional sensors to your model. The Traxxas Link Application is available on Google Play and the App Store.

 

Micro Receiver, TQi 2.4GHz with Traxxas Link and TSM (5-channel) (#6533) (top view)5-channel Micro Receiver with Fail-Safe Security 
The TQi 2.4GHz micro receiver fits easily into any vehicle, and features dual channel-1 outputs for easy installation in vehicles with dual steering servos—no Y-harness necessary! The integrated LINK button makes it fast and easy to bind the receiver, and the two-color LED indicates power-on and bind status for fool-proof control and convenience. Traxxas Link Model Memory allows the receiver to recognize up to thirty TQi 2.4GHz Traxxas Link enabled transmitters—just switch on and drive. In the event of signal loss due to an accidental switch-off or depleted batteries, the receiver will automatically return the throttle to neutral and hold the last commanded steering position. The Fail Safe programming is built-in and does not need to be set or activated. Three telemetry ports are incorporated in the 5-channel receiver to allow real-time data to be transmitted from your Traxxas model to the TQi transmitter.

Waterproof Receiver Box (#3628) with TQi TSM Traxxas Link Receiver (#6533)
Patented Sealed Watertight Receiver Box 
Stampede VXL’s receiver is fully enclosed to protect it from the elements. The antenna and servo wires route neatly through a special watertight seal and a custom blue O-ring seals the receiver box to protect the receiver from water. The receiver can be removed for service and aftermarket receivers can be installed without losing the sealing properties of the box.

 

 

VXL-3s Waterproof ESC (#3355R)Velineon® VXL-3s ESC:

  • Innovative waterproof design
  • Three programmable
    drive profiles:

    • Sport Mode – forward / brake / reverse
    • Race Mode – forward / brake
    • Training Mode™ – 50% forward / brake / 50% reverse (patent pending)
  • Integrated on/off switch
  • Traxxas EZ-Set® one-button setup
  • Large heat sink
  • High-efficiency MOSFET transistors
  • Built-in two-stage low-voltage detection for LiPo batteries.
  • NiMH battery packs: 4-9 cells (4.8 to 10.8 volts)
  • LiPo battery packs: 2-3 cells (7.4 to 11.1 volts)
  • For more info about the Velineon VXL-3s ESC click here

 

Velineon 3500 Brushless Motor (#3351R) Cut-Away View (right)Velineon® 3500 Brushless Motor:

  • Ultra high-temperature sintered Neodymium magnets
  • Optimized for power and efficiency in 1/10th scale vehicles
  • Consistent, high-power output, run after run
  • Low-maintenance, unique Traxxas design
  • Efficient, high-speed ball bearings
  • Precision-balanced rotor
  • Protective end cap
  • 10-Turn, 3500kV
  • Rebuildable
  • Hex hardware
  • Brilliant blue-anodizing finish
  • Silicon steel laminations
  • Delivers more power than comparable brushed motors
  • For more info about the Velineon 3500 Brushless motor click here

 

Maxx Cable 12-Gauge WireMaxx Cable 12-Gauge Wire
This super-flexible, high-current, low-resistance 12-gauge, wire flows energy in and out of the electronic speed control for maximum performance. The Traxxas Connector combines with Maxx cable to extract all the power your battery can supply.

 

Hex Hardware
Hex Hardware
Stampede VXL uses pro-quality, high-grade, metric hex-drive hardware for extra strength and easy maintenance and repair. The black-oxide rust-resistant finish provides a high tech look and feel.

 

Rubber-Sealed Ball BearingsRubber-Sealed Ball Bearings
Precision 5x11mm rubber-sealed bearings offer super low-friction performance and maximum protection in dirty environments. They are used in all exposed locations on the truck and provide virtually maintenance free reliability.

 

Heavy-Duty Hub Carriers & Steering Blocks (Stampede VXL, #3607)Heavy-Duty Hub Carriers & Steering Blocks
Stampede VXL features all ball bearing front steering blocks and rear hub carriers. They utilize large 5x11mm ball bearings for long-term precision performance, smooth operation, and increased durability.

 

Adjustable Steel Turnbuckles (Stampede VXL, #3607)Adjustable Steel Turnbuckles
Factory fitted, heavy-duty steel turnbuckles allow camber and toe tuning. Stampede VXL is completely adjustable right out of the box to fine tune handling agility and high-speed performance. Captured rod ends provide unmatched durability and they simply won’t pop off.

 

Talon tires on All-Star black-chrome wheelsTalon™ 2.8″ Pre-Glued Tires with Foam Inserts 
The advanced Talon tread pattern provides excellent traction and proven durability! The soft compound rubber hooks up for maximum acceleration and great grip on a wide variety of surfaces: dirt, grass, pavement, and rocks.

The black-chrome All-Star™ wheels feature a lightweight horizontal bead that holds the tire to the rim even under extreme rpm. Performance-designed foam inserts are standard and all tires come pre-glued from the factory to get you rolling right out of the box.

 

Adjustable Wheelie Bar (#3678) (fits Slash, Rustler, Bandit and Stampede series)Adjustable Wheelie Bar
Stampede VXL uses a unique Traxxas adjustable wheelie bar. The patented wheelie bar features four position adjustments for wheelie control or for wheelies on command. The durable nylon composite mount offers an extra level of protection for the motor and transmission case.

 

Torque-Control™Torque-Control™ Slipper Clutch
The Torque-Control slipper clutch utilizes special semi-metallic friction material and finned aluminum alloy pressure plates to dissipate heat and provide consistent yet adjustable traction control. The semi-metallic friction material remains stable across a wide temperature range to provide smooth, linear engagement you can count on. Spur gears can be removed and replaced without altering the slipper adjustment.

65+mph with Included Optional Pinion Gear

Included Optional Pinion Gear
Stampede reaches a scorching 65+mph top speed using an optional 30-tooth pinion gear, 83-tooth spur gear, and a 3-cell 11.1V Lithium-polymer battery pack (sold separately). Out of the box, the installed 19-tooth pinion gear is just right for all-around, wheelie popping, on or off-road action.

 

Metal Gear Magnum 272™ Transmission (cut-away)Magnum 272™ Transmission
Stampede VXL’s Magnum 272 transmission features all metal gear internals riding on ultra-smooth sealed ball bearings. Combined with the smooth 48-pitch gears, power transfers quietly to the durable telescoping U-joint driveshafts. The sealed gearbox protects the transmission components from dirt and rocks.

 

Steel-Composite Planetary Gear DifferentialPlanetary Gear Differential
The composite Traxxas planetary gear differential features a steel ring gear with a nylon housing for long life. Hardened steel internal gears provide maximum strength for rigorous off-road bashing. This type of differential requires virtually no maintenance and its efficient design puts maximum tire-shredding torque to the wheels.

 

Telescoping Driveshafts (Stampede VXl, #3607)Yokes with Telescopic Driveshafts
Stampede VXL’s drive yokes provide maximum durability to withstand the extreme power of the Velineon Brushless Power System. The slider driveshafts are extremely durable and allow greater articulation for increased suspension travel.

 

Powder Coated White Springs (Stampede VXL, #3607)Powder Coated White Springs
White springs feature a race-tuned spring rate for more responsive handling and the long-lasting, white powder coated finish sets Stampede VXL apart from the pack.

 

ProGraphix BodiesProGraphix® Body 
Stampede VXL’s fully trimmed and painted ProGraphix body comes with pre-applied decals to save you time and get you driving just minutes out of the box. Traxxas’ ProGraphix bodies are the toughest, hottest looking bodies around.

 

Motor Mount with Cooling Channels (Stampede VXL, #3607/#3608)
Motor Mount with Cooling Channels
The sealed gearbox protects the transmission components from dirt and rocks. The molded motor plate includes finned cooling channels where the motor mounts to the motor plate.

 

Digital High-Torque (ball bearing) Waterproof Servo (#2075)Digital High-Torque Waterproof Steering Servo
A monster truck needs a powerful steering servo for responsive performance. A Traxxas #2075 digital high-torque, ball bearing steering servo comes standard for precise control, quick response, and unmatched torque—all in a waterproof case. It has over 50% more torque than the standard Stampede’s 2056 servo and is 25% faster! That’s 125 oz-in torque, 0.16-second speed!

 

Oil-Filled Ultra Shocks (#3762A), Progressive Rate White Springs (#4957R) (cut-away)Oil-Filled Ultra Shocks™
Stampede’s oil-filled Ultra Shocks utilize X-ring technology for a perfect seal and super-smooth performance. They are fully tunable with a wide range of oils, springs, and pistons. Features include pressure bladders for air/oil separation and spring clips to precisely change the ride height and spring pre-load. They can be renewed in minutes with our inexpensive rebuild kits.

 

Suspension Tie Bar (Stampede VXL, #3607/#3608)Suspension Tie Bar
The composite tie bar strengthens the front bulkhead and suspension arms for increased durability.